TN7078-B Battery Impact &Crush& Nail Penetration Tester
INTRODUCTION
Integral battery impact crush nail penetration machine is Bell newly designed equipment combined with crush,nail penetration
and impact function have the advantage of space saving .Test battery safety performance through crush,impact and nail
penetration test, becomes popular inspection equipment for battery manufacturers .
FEATURES
1 .The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2 .Lighting system is designed to observe the internal testing process;
3 .Nail Penetration/Crush Velocity with controllable range of 10- 80mm/s;
4 .Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;
5 .Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge
the exhaust air.
6 .Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter,
which can reduce the noise and improve safety.
Technical Parameters:
Pressure(KN) |
20 |
|
Max. Displacement(mm) |
200, 300 |
|
Auxiliary Function(Optional) |
Voltage, temperature sampling, camera monitoring system. Fire-extinguishing system,
smoke evacuation & filtering system |
|
Crush/Nail Penetration Speed |
0 - 80 mm/min(Controllable ) |
|
Testing Space(mm) |
200X200X200mm,300X300X300mm
(Available to customrized) |
|
External Dimension(mm) |
W1480 X D720 X H2040 |
|
Control Cabinet Dimension (mm) |
W500 X D500 X H1200 |
|
Optional Parameters |
||
Voltage Selection |
0- 10V,0--100V |
|
Temp. Sampling Range |
0 - 1200℃ |
|
Voltage, Temperature Accuracy |
±1%FS |
|
Voltage Resolution |
1mV |
|
Temperature Resolution |
0.1℃ |
|
Crush, Nail Penetration Technical Parameters |
||
Speed |
0 - 80mm/min(Controllable), 200 mm/min available to customrized) |
|
Crush/Nail Penetration Range |
0- 30 0mm to select |
|
Structure |
Vertical(select according to actual size) |
|
Testing Condition |
Applied force of 13 KN, once the maximum pressure has
been obtained it is to be released. |
|
Crush/Nail Penetration Method |
Vertical |
|
Crush/Nail Penetration Deformation |
No (computerize can be customrized) |
|
Crush/Nail Penetration Remaining Time |
0- 99hours 99mins99sec |
|
Driven Method |
Hydraulic |
|
Crush/Nail Penetration Accuracy |
±1% |
|
High Temp. Resistant Steel Needles |
Diameter φ3mm- φ8mm |
|
Nail Penetration Speed Accuracy |
±0.1 mm/s |
|
Impact Technical Parameters |
||
Driven Method |
Electric,free falling |
|
Steel Bar Diameter |
15.8 mm or 7.9mm |
|
Structure |
Vertical |
|
Testing Condition |
The weight can be raised to a certain height and release while ensure the weight
without inclination or swing in free drop. |
|
Dropping Method |
Free Falling |
|
Accuracy |
±1% |
|
Structure |
||
Chamber |
Independent vertical test machine
and control system |
|
Communication |
No (computerize can be customrizedd) |
|
Crush Fixture |
Flat crush tray,select different
fixture according different standard |
|
Nail Penetrate Fixture |
customrized |
|
Data Sampling Module |
Independent remote sampling, multi-voltage, temperature, current
acquisition channel (optional) |
|
Standard Channel Quantity |
2-Channel, 4-Channel, 8-Channel,
multi-data acquisition system (optional) |
|
Camera Monitoring System |
Test zone installed with high definition camera monitoring system in
remote control with explosion-proof (optional). |
|
Standard Configuration |
Crush nail penetration impact integrated machine 1set, control cabinet 1set, crush tray 1 set, high temperature resistance steel needle diameters φ3mm- φ8mm 1set,
fix battery fixture 1 set, steel bar 1 piece |
|
Testing Fixture |
customrized according to actual size |
|
Power Source |
AC380V 50Hz Three Phase Five Wires |
|
Working Environment |
0℃- 45℃ |
STANDARDS
Impact Test Standard
UL1642 Lithium Batteries
UL2054-2005 Household and Commercial Batteries
UN38.3 Lithium ion battery safety testing
GB/T 18287-2000 General specification of lithium-ion battery for cellular phone
SJ/T 11169-1998 Standard for lithium batteries
YD 1268- 2003 The safety specification and test method for lithium batteries and charger
SJ/T 11170-1998 Standard for household and commercial batteries
Crush Test Standard
GB/T 2900.11-1988Terminology of (secondary) cell or battery : crush
YD 1268- 2003 The safety specification and test method for lithium batteries and charger : crush
SJ/T 11169-1998Standard for lithium batteries:crush
UL 1642Lithium batteries : crush
GB/T 8897.4-2002Primary batteries-Part 4: Safety of lithium batteries
SJ/T 11170-1998 Standard for household and commercial batteries- crush test
YDB 032-2009 Back-up lithium-ion battery for telecommunications
UL 2054 Household and Commercial Batteries
QB/T 2502-2000 General specification of lithium-ion battery
Nail penetration standard
GB/T 18332.2-2001Nickel-metal hydrate batteries of electric road vehicles nail penetrations
MT/T 1051-2007 Lithium-ion batteries for cap lamp nail penetration test
Copyright @ TONNY INTERNATIONAL粤ICP备17109882号
E-mail : 15015204254@163.com
Providing international recognition test equipments, consumables, in addition also providing customers with total laboratory solutions and good service platform.
Safety Test Instruments R&D