TN7008 Battery Extrusion Tester
Test battery safety performance through crush, after test the sample shall not explode or catch fire.
This equipment becomes necessary inspection equipment for the battery manufacturer and researcher.
1.The wire enclosed with metal fire-proof cover, which is available to prevent the flame during testing process.
2.Lighting system is designed to observe the internal testing process;
3. Nail Penetration/Crush Force controllable within range from 250N to 13KN ,meet different standards;
4.Wire hole provides a possibility to test internal temperature or air pressure while vent hole with air blower can discharge the
5.Control system employs independent control cabinet & separated with the test chamber with a distance 1-2 meter,
which can reduce the noise and improve safety.
1.Clamping way: use two flat plates
2.Driving force:hydraulic way
3.Force precision:±1.0 kg
4.Test space:30×40×30 cm(adjustable)
5.Power:AC 220V±10％, 50Hz
1.Force range:Equipment can provide constant 250N±10N(56±2pound) pressure, for at least 5 s (time can be setted)
2.Driving force:mechanical way
3.Test position:both sides ,the top,the bottom and so on
MT/T 1051-2007 Lithium-ion batteries for cap lamp --Crush Test
UL 1642 Lithium Batteries --Crush Test
UL 2054 Lithium Batteries
GB/T 2900.11-1988 Terminology of (secondary) cell or battery
YD 1268- 2003 The safety specification and test method for lithium batteries and charger--crush test
SJ/T 11169-1998 Standard for lithium batteries crush test
GB/T 8897.4-2002 Primary batteries: Safety of lithium batteries --crush test
SJ/T 11170-1998 Standard for household and commercial batteries --crush test
YDB 032-2009Back-up Lithium-ion battery for telecommunications
QB/T 2502-2000 General specification of lithium-ion battery --crush test
Copyright @ TONNY INTERNATIONAL
E-mail : firstname.lastname@example.org