TN3238 Ride-on Toys Dynamic Strength Tester ,2 m/s Impact Tester
Baby Walkers Crash Testing Machine
1.Dynamic strength test for wheeled ride-on toys and electrically-driven toys;
2.Baby walking frames crash test.
1.Load the toy for 5 min in the most onerous position with the appropriate mass on its standing or sitting surface.
Secure the load to the toy in a position corresponding to the normal use of the toy.
Drive the toy three times at a steady speed of (2 ±0.2) m/s into a non-resillent with a height of 50 mm.
Then check whether the structure and properties of sample are in good condition.
2.Load baby walking frames with standard load,drive them once to impact the wall which plywood with a thickness of
20 mm,then check whether the structure and properties of sample are in good condition.
1.PLC program controller,touch screen display;
2.Smart desigh,very easy to remove and install;
3.Body with aluminum,beatififul and generous;
4.The base USES the steel structure, solid and strong, without fixed on the ground, can be used directly;
5.Imported servo motor, speed from zero to maximum in 0.3 s;
6.Servo motor speed double closed loop control, ensure the impact speed constan t and accurate, accuracy can reach 0.1 m/s;
7.Unique fixed load device, ensure that the load will not fall off.
1.Sample number : 1 / time
2.Dynamic load : 25 kg and 50 kg (for GB6675,ISO 8124);54.5 kg and 29.5 kg (for EN 71);
12 kg ( for GB 14749,EN 1273,ASTM F977)
3.Wall material : non-resilient step with a heigh of 50±2 mm(for ride-on toys);
plywood with a thickness of 20 mm(for baby walking frames)
4.Test speed: 0-2.5 m/s adjustable ,2 m/s ±0.2 m/s (GB,ISO,EN71);
2.2±0.2 m/s (for electrically-drive toys,EN71)
5.Test channel width: 900 mm
6.Power: AC 220V,50 Hz,3000 W
7.Dimension: 4500 *1530*1560 mm
8.Packing size: 1200*400*1400 mm
9.Weight: 600 kg
STANDARDS(Pls indicate the standard before order)
GB 6675.2-2014,ISO 8124-1-2014;EN 71-1-2014;GB 14749,EN 1273,ASTM F977
Copyright @ TONNY INTERNATIONAL
E-mail : firstname.lastname@example.org