TN11428 Filling Power Meter
By measuring the volume of the feather hair under the pressure of the constant weight . After press the start button,
the pressure plate will be at a predetermined speed (0.54 m/min) move down.,when it comes into contact with the samples
in the measuring cylinder , as a result of the sample reaction, its decline rate reduced to be less than 0.3 m/min.
At the same time, the time of loading (1 min) starts,test values can be be shown continuous.
Then you can print the test data.
1.Control mode: PLC,touch screen display, automatic control,just put the sample into the test tube, start the instrument,
about 10 minutes later get the test results from the printing system.
2.Adopt sophisticated stepper motor, it uses the blowing system, ensure the feather hair in a uniform state, make each
measurement data have better reproducibility.
3.Can set blowing time,test time.
4.Unique design of filter system ensures the feather not flying to pollute the environment.
1.The measuring cylinder: 288 mm diameter (big drum); 244 mm (small tube)
2.The cylinder height: 500 mm
3.Cylinder material: organic glass
4.Filling the sample quantity: CEN 20 g; DIN EN12130 20 g; USA 30 g; JIS 30 g
5.Pressure plate: material is PMMA, diameter 284 mm (big drum); 239 mm (small tube)
6. Load: European standard and American standard (ISO & ASTM) 94.5 g; The Japanese standard (JIS), 120 g
7.The pressure: European standard and American standard (ISO & ASTM) 0.14878 g/cm3,
Japanese standard (JIS) 0.188 g/cm3
8.Blow into air volume: 30 L
9.Pressure plate hanging rod: soft
10.The test program when encountering the feather hair falling speed: less than 0.3 m/min
11.Dimension: 960 * 480 * 1480 mm
12.Weight: 200 kg
IDFB-FP,BS EN 12130, GB/T14272-2011,GB/T10288, FZ/T 80001
Copyright @ TONNY INTERNATIONAL
E-mail : firstname.lastname@example.org