TN11598 Electronic Single Fiber Strength Tester

INTRODUCTION

The machine can measure the breaking strength, breaking elongation value and breaking time of a single fiber. Through the software, it can also directly calculate the average breaking strength, standard deviation, coefficient of variation, breaking strength, average breaking strength elongation value, standard deviation, coefficient of variation, breaking time, elongation at break and initial modulus and other data.

FEATURES AND BENEFITS

1.The instrument is controlled by microcomputer, constant elongation (CRE) detection, automatic action control, synchronous completion of data processing, large screen LCD directly display test process data, support print out, set by the interface guide, the test process is more smooth.

2. pneumatic gripper, clamping more stable.

3. The minimum elongation, minimum strength, fracture point residual range can be adjusted by the operator according to the actual situation of the sample, in order to improve efficiency and avoid unqualified tests.

4.AV average and CV% unevenness will be counted automatically and timely after each test, so that the test can be deleted and continued even if the abnormal test is known.

5. Easy to measure, can use any appropriate known weight to complete the calibration.

6. Servo motor, linear guide rail, ball screw drive, quiet effect is good, accurate positioning.

7. Power off protection function, instant or long time power off, then turn on, still stored when the group data, can continue to test.

8. Overload protection function, encounter over the range of stretching and compression action, will automatically stop, through the program automatically protect the sensor.

9. Automatic zero function, no matter what kind of gripper is replaced, it can automatically adjust the zero position without calibration.

10. Configure special software to expand more test methods and analysis functions, record and store the whole process of the test, all data, graphics, F-L collection points can be imported into Word, Excel, Txt, convenient copy, transfer and use, enhance practicability.

TECHNICAL PARAEMETERS

1.Test range : 0~500 cN (500 g)

2.Resolution : 0.01 cN

3.Accuracy : ±0.2% F.S

4.Upper and lower gripper spacing : 10~60 mm can be set,automatic positioning

5.Elongation range : ≤150 mm

6.Elongation measurement resolution : 0.01 mm

7.Test speed : 1~200 mm/min can be set

8.Error of speed : ≤2% 

9.Timing range : 0~99 s

10.Break time error : ±0.01 s

11.Power supply : AC220V,50/60 Hz,600W

12.Air source : 6 kg/cm2 or above stable air source (provided by user)

13.Dimension : 40×32×80 cm

14.Weight : 40 kg

STANDARDS

GB/T 14337,GB/T 13835.5-2009,GB/T 9997,ISO 5079,etc