TN11328-B UTM Universal Testing Machine

INTRODUCTION

Suitable for tensile, tearing, top breaking, fixed elongation, fixed load, elasticity, thread slip, stripping and other mechanical properties of all kinds of materials.

Widely used in rubber, plastic, leather, metal, wire, paper, packaging, building materials, petrochemical, electrical, geotechnical and other industries.

WORKING MODE

CRE principle, microcomputer control, Chinese and English software display, support online communication.

Remote control,convenient training operation,application upgrade,remote troubleshooting.

Main structure :

By the upper beam, the middle beam, the lower beam and the bottom panel through the ball screw and column frame structure. The full digital AC servo motor drives the reducer and the synchronous gear belt to drive the precision ball screw without clearance to rotate and drive the beam to move up and down.

Host frame :

Adopt high precision, no clearance precision ball screw, improve the transmission efficiency and displacement accuracy. High strength light bar is used to fix the upper beam and work table, forming a high rigid frame structure.

Displacement measuring device :

High precision photoelectric encoder, relative accuracy up to ±0.5%.

Test force measurement :

The spoke-type strain sensor with high precision and high stability and the high precision measurement and amplification system ensure the high precision of the test force.

Limit switch :

The machine has program control and mechanical limit protection function, automatically stop after reaching the limit.

Control software system :

Adopt brand computer, control system software operating system platform, with fast running speed, mild interface, simple operation and so on. It can meet the test and measurement needs of different materials, equipped with hundreds of test standard templates, which can meet the requirements of international standards, national standards or industry standards.

Control software includes :

Log in. Authority management; Change the password. Unit system; Calibration; Online; Language switching; Options; Registration; The activation; Material editing; Control method; Control parameters; Test results; Report editing; Word statement; Manual point; Graphical manipulation.

Automatic saving : automatic saving of test data and test conditions to the computer, to prevent the data loss caused by sudden power failure or forgetting to save.

Automatic transmission : the beam speed can be changed automatically according to the preset program or manually during the test.

Automatic calibration : the system can automatically realize the accuracy calibration of the display value.

Results reproduction : the test results can be accessed arbitrarily, and the data curve can be reanalyzed.

Curve traversal : after the test is completed, the mouse can be used to find out the force value and deformation data of the test curve point by point, and the test parameters of various materials are convenient and practical.

Result comparison : The characteristic curves of multiple samples can be superimposed, reproduced and magnified locally by different colors to achieve the analysis and comparison of a group of samples.

Curve selection : stress-strain, force-time, strength-time, displacement-force value and other curves can be selected to display and print according to need.

Batch test : for samples with the same parameters, a batch of test samples can be completed consecutively after setting.

Test report : the test report can be stored in the format required by users, and then edited and printed.

FEATURES AND BENEFITS

1. Automatic calibration : the system can automatically realize the calibration of the standard value, optional units : N, KGF, LBF, mm and in.

2. In the whole test process, the large liquid crystal real-time display test force, peak value, displacement, speed, status, etc.

3. Fracture judgment : after specimen fracture, the moving beam automatically stops moving.

4. Limit protection: with mechanical and control two limit protection function.

5. Force sensor overload protection of 5%, up to 800%, optional.

6. Display reading can be accurate to 0.001mm, absolute position can be accurate to 0.001mm.

7. High quality motor drive, super silent work.

8. Original precision ball screw and guidance system.

9. High precision closed-loop speed controller, slow moving device and optional quick return.

10. Microcomputer USB universal interface.

11. Fixed load and travel protection limits, immediate load and tensile cycle test, long-term creep test.

12. Digital control sample damage detection function, automatic return to the test position without mechanical tension state, impact protection, optional automatic reset, automatic zero.

TECHNICAL PARAMETERS

1. Measuring force range : 200 kg/2 KN(or specified 1 KN, 3 KN, 5 KN)

2. Resolution : 0.001N

3. Precision of force value : ≤0.2% F.S

4. Operating speed : 0.001~500 mm/min, can be set

5. Speed accuracy : ± 0.2% of the set speed

6. Beam stroke : 500~800 mm (excluding the length of fixture), other stroke can also be customized

7. Displacement accuracy : within ±0.2% of the value shown

8.Effective test width : 400 mm

9. Sample clamping method : manual clamping

10. Power supply : AC220V,50/60 Hz,300W

11. Weight : 60 kg

12. Dimension : 50×46×130 cm(W×D×H)

STANDARDS

ASTM E4-2013, JJG 139-2014 and AATCC,EN,ISO,GB,JIS,DIN,BS,etc